Brickform cem-coat

Is a high quality opaque coating made especially for use over existing, unsealed, interior or exterior, concrete surfaces
Coat surface with a single color or create an antiqued look on textured surfaces
Reduces the effects of fungus and is designed to be extremely uv resistant This product has a very similar process of application just like paint. Very user friendly and simple to apply.
Packaged as a two part mixture

Share this

Description

Is a high quality opaque coating made especially for use over existing, unsealed, interior or exterior, concrete surfaces
Coat surface with a single color or create an antiqued look on textured surfaces
Reduces the effects of fungus and is designed to be extremely uv resistant This product has a very similar process of application just like paint. Very user friendly and simple to apply.
Packaged as a two part mixture
Each kit contains equal parts a and b
Coverage: rate of 100-300 soft per gallon, more may be required depending upon method of application, texture, porosity of material, and moisture of the substrate
Allow new concrete to cure for at least 28days prior to application
Make sure surface is completely clean and free of any efflorescence, oil, dirt, wax, old paint or sealers
Clean if necessary , acid washing is not recommended
Apply between 50-80 degrees
Can be applied with brush, sponge, or medium napped roller
Mix two or three minutes or until all solids have dissolved
Dries in 45 min
Damp misting the concrete with water can extend work time and aid in application but there should be no standing puddles
If second coats is required apply at least 2 hrs after the first coat but within 24 hrs
Use all mixed arterial within 4-6 hrs
If mixture starts to thicken, remix until consistency will become thinner